Kisker Biotech
Filter Tip
Pipet Tips
Quali-
Tips, Gel- Loading Tips
PCR-,HTS-
and Tissue Culture Plastic
Centrifuge Tubes
Rack Systems
Cryoproducts
Autoradiography
DNA-Workstation
& Hybridisation
Electropheresis
Dry block heat bath
Mini Centrifuges
Rotator & Vortex Mixer
Nylon Wool & PAP PEN
PCR & DNA Measurement
NanoPhotometerTM
Microparticles
0,00 €
0

Mini Centrifuges

 
Micro-Centrifuge, "Sprout", the small complete Centrifuge
  • 6.000 rpm (2.000xg) for 6 x 0,5ml tubes, 6 x 1,5 ml tubes and 2 strips á 8 x 0,2 ml PCR tubes

  • ergonomical lid-design - start/stopp-function integrated

  • simple to clean durable ABS-cover

  • autostopp bei opening the lid

  • rotors simple to change with included allen wrench


    • helpful accessories inclusive:
  • rotor for 6 x 1,5/2,0 ml

  • rotor for 3 x 0,5 ml and 3 x 1,5/2,0 ml tubes

  • strip-rotor for two strips of 0,2 ml PCR-tubes

  • storage box for rotors to keep unused rotors safe on the bench

  • work-rack for 6 x 0,5 ml, 6 x 1,5 ml and 16 x 0.2 ml tubes for easy sample preparation

  • dimensions: 152 x 128 x 104mm (L x W x H), weight: 800g
    		•
    Cat. #DescriptionPower requirementEuroUnits
    MZ001-SPMicro-Centrifuge with complete accessories220Volt,50Hz185,90
     
    Micro-Centrifuge, Vortex Mixer, "two in one"
    A space-saving and low cost combination of centrifuge and vortex in new design. Stopping long ways between centrifugation and vortexing. Tubes can be vortexed directly through the opening in the lid.
  • centrifugation speed 2.400 rpm at 700 x G

  • vortex speed 2.400 rpm

  • autostopp, when lid is open

  • continuous and impulse operation

  • weight: 2,1 kg, dimensions are 190 x 235 x 125 mm

    • The centrifuge - vortex mixer is supplied with two rotor-discs, one for 12 x 0,5 ml and 12 x 0,2 ml and one for 12 x 1,5 ml tubes.
    Cat. #DescriptionPowerEuroUnits
    MZ002Centrifuge/Vortexmixer220Volt, 50Hz289,00
    MZ002-A-8x0,2Rotor for 8er-strips0,2 ml Tubes21,80
    MZ002-1818-Place-Rotor for 6 x 0,2/ 0,5/ 1,5 ml Tubes21,80
     
    Multi-Fuge, 6.000 rpm: centrifuge or vortex, both in combination
    centrifuge: 2.000 - 6.000 rpm, 500- steps chooseable

    vortexing:soft - medium - hard

    combine
    1- 99 minutes timer, 999 repeats
    weight 2,5 kg, dimensions 190 x 235 x 125 mm

    rotor discs inclusive for 12x1,5 ml and 12 x 0,5/ 12x 0,2 ml
    Cat. #DescriptionPowerEuroUnits
    MZ009MultifugeA/C 12 V, 1 A478,00
    MZ009-A-8x0,2Rotor for 8-Strips-0,2 ml tubes0,2 ml Tubes25,00
     
    SM-9000 Microcentrifuge for 12 x 1,5/2,0 ml
  • small - handy - fast

  • within 2 seconds up to 9000 rpm, constant speed, 5.000 x g

  • lid open > dynamic breaking

  • rotor inclusive for 12 x 1,5 ml/2,0 ml tubes

  • brushless run in solid metal housing

  • dimensions: 200 x 170 x 150 mm (LxWxH)

  • weight 3 kg
    		•
    Cat. #PowerEuroUnits
    MZ008220V, 50-60Hz385,00
    MZ008-A-8x0.2Rotor for 2 x 8er Stips 0,2 ml39,00
     
    EBA 20 small centrifuge for 8 x 15 ml Tubes
    The practical and handy EBA 20 is the ideal centrifuge for low sample quantities.
    It is supplied with an 8-place angle rotor and fitted with the E control panel.
    The rotor can be used with following tubes:
  • 8 x 15ml (17 x 100mm)

  • 4 x 15ml, Falcons with Screwcaps (17 x 120mm)

  • 8 x 9 - 10ml Blood collection tubes (16,5 x 92mm)

  • 4 x 8ml Bloodcollection tubes (16 x 125mm)

  • 8 x 8,5 - 100ml Blood collection tubes (16x100mm)

  • technical specification: lid locking and holding device; display of real speed

  • speed: 6.000 rpm, to set in steps of 100, 3.421 x g
    dimension/weight: 215 x 231 x 292 (HxWxD), 4kg
    		•
    Cat. #PowerEuroUnits
    MZ007208-240V, 50/60Hz799,00
     
    Laboratory-Centrifuge for 50 ml Falcons and Microtestplates
    MZ-014 is a modern benchtop laboratory medical centrifuge useful for sedimentation of cells, bacteria, yeast, formed blood elements. It provides operation with tubes and microtest plates. MZ014 is designed for safe work (metal protecting housing), easy maintenance and wide application range in medical, biochemical, industrial and other type laboratories.

    specifications:
  • variable speed 100 - 3000 rpm, with microplate rotor max 2.000 rpm, 560 x g

  • Display LCD

  • centrifugation time max. 1 to 90 minutes

  • Dimensions 470 x 400 x 203 mm, weight ca 13,5 kg
    		•
    Cat. #DescriptionEuroUnits
    MZ014Laboratory-Centrifuge, 220 Volt, 50 Hz1290,00
    MZ014-MTPRotor for 2 Microtestplates165,00
    MZ014-17100swing out rotor for 12 x 10 ml/17x100 mm165,00
    MZ014-17120swing out rotor for 12 x 15 ml/17x120 mm Falcons270,00
    MZ014-29115swing out rotor for 6 x 50 ml/29x115 mm Falcons270,00
     
    "Smart Runner", Microlitercentrifuge for molecularbiology, powerful and low priced, 14.000 rpm,15.558 x g
    This microlitercentrifuge is delivered complete with angel rotor inclusive lid for 24 x 1,5/2,0 ml tubes. Smart Runner is going quickly to the maximum speed and fits on small space on the laboratory desc.

    The advantages:
  • lid locking and holding device

  • lid-open-button

  • emergency lid lock release

  • motor overheating protection

  • imbalance switch-off

  • settings of parameters by foil keyboard

  • speed increments 100 rpm, continuous run, short run
    timer 1 to 99 minutes

  • dimensions 199 x 231 x 292 mm (HxWxD), weight around 7,0 kg
    		•
    Cat. #DescriptionEuroUnits
    MZ010-1242Smart Runner inclusive 24-fold Rotor1089,00
    MZ010-2024Adapter for 0,2 ml PCR tubes1,50
    MZ010-2023Adapter for 0,5 ml tubes1,50
     
    "Cool Sprinter" Microlitercentrifuge uncooled or cooled -10°C - 40°C, 14.000 rpm, 18.626 x g
    Cool Sprinter is one of the fastest in his range. The maximum Speed is 14.000 rpm, RCF is 18.626 x g. With "Fast Cool" mode the centrifuge cools in 10 to 15 minutes to 4°C. Thermo sensitive samples can be centrifuged carefully because of this reliable cooling. The smooth running and powerful motor with service free drive guarantees best separation results. Aerosol tight and autoclavable accessories are available for save handling of infectious material.

    Comfort: display of IS-Situation during the run
    well readable digital display
  • motor lid locking

  • impulse key for short run

  • lid-open-key

  • RCF-key

  • speed increments 100 rpm

  • running time max. 99 minutes


  • Cooling MZ011: temperature in 1°C-steps from -10 to 40°C

  • pre-cooling function

  • stand-by cooling

  • automatic stop at lid opening or end of time setting


  • Safety: stop-display

  • microprocessor - controlled

  • lid locking and emergency lid lock release

  • motor- overheating protection

  • imbalance switch of

  • dimensions (HxBxT) MZ011-UK: 260 x 275 x 347 mm, weight 11,5 kg, MZ011: 260 x 281 x 547 weight 28 kg

  • g-force is depending on used Rotor/Tube as listed below.
    		•
    Cat. #RotorcapacityRCF (g-Force)EuroUnits
    MZ011-UKSprinter centrifuge 1165,00
    MZ011Cool Sprinter centrifuge 3097,00
    MZ011-2425Aerosol tight lid for 2424/2430 159,00
    MZ011-2424Rotor for 24 x 1,5/2,0 ml Tubes18.662229,00
    MZ011-2430Rotor for 30 x 0,5 ml Tubes17.749339,00
    MZ011-2018Rotor for 4 x Strips á 0,2 ml PCR Tubes12.490298,00
    MZ011-2040Lid for Rotor 2018 57,90
    MZ011-2024Reduction for 0,2 ml PCR Tubes 1,50
    MZ011-2023Reduction for 0,5 ml Tubes 1,50
     
    "ROTOFIX 32A" Table-centrifuge 6.000 rpm, 4.186 x g, 4 x 100 ml or 28 x 15 ml
    ROTOFIX 32A is a robust table-centrifuge for daily routine in research und hospital laboratory. The centrifuge is well equipped for tasks in clinical chemistry and cytology.The maximum speed is 6.000 rpm, RCF is 4.186 x g. The smooth running and powerful motor with service free drive guarantees best separation results.

    Comfort: well readable digital display, waterproof foil
    lid locking and closing
    Switch over during the run to coose rpm or rcf
    impulse key for short run

    speed increments 100 rpm
    running time max. 99 minutes

    safetey:
  • automatic rotor recognise

  • motor- overheating protection

  • imbalance switch -off

  • window in lid

  • dimensions (HxWxD) MZ015: 257 x 366 x 430 mm, weight 25,0 kg

  • g-force is depending on used rotor/tube as listed below.
    		•
    Cat. #Rotor capacityRCF (g-Force)EuroUnits
    MZ015ROTOFIX 32A Centrifuge 1318,00
    MZ015-1624swing out rotor 4-fold without suspension2.665339,00
    MZ015-1369suspension for 1624 for 4 tubes 17x100 mm 34,00
    MZ015-1381reduction for 1624 for tubes max.100 ml 103,00
    MZ015-1382hygienic lid PC for beaker 1381 24,50
    MZ015-1348reduction for 4 Vacutainer 16x75 / 100 mm 73,00
    MZ015-1418Winkelrotor 8-fach ohne Gehänge 45°2.596286,00
    MZ015-1467Suspension for 1418 für 4 x 15 ml, 17 x 120 mm 23,90
    MZ015-1468Einsatz for 1418 für 1 x 50 ml, 29 x 115 mm 23,90
    MZ015-1398light metal suspension for 1324 81,40
    MZ015-1483reduction for 1398, 4 x 15 ml Falcon 86,60
    MZ015-1617swing out rotor 8x50 ml Falcon 45°2.469439,00
    MZ015-1619swing out rotor 6x50 ml Falcon 90°2.701469,00
    MZ015-1462Areduction for 15 ml Falcon tubes 15,00
    MZ015-1628swing out rotor 12-fold withot suspension2.683199,00
    MZ015-1621suspension for rotor 1628 f. 17x100 mm 13,60
    MZ015-1660cyto-beaker, PA-lightmetal for rotor 1624 104,90
    MZ015-1648cyto-rotor 8-fold with cytochambers 1439,00
     
    Microcentrifuge, with or without refrigeration -20°C up to +40°C, 18.000 rpm
    Small bench top centrifuge for molecular biology, virology and bacteriology. Tube volume 0,2 ml up to 50 ml and hematocrit capillaries. Brushless drive guarantees exceptionally smooth running and speed stability; metal housing, centrifugation chamber made from easy to clean stainless steel; safety lid with window for speed control; lid looking and holding devise; automatic recognise of the rotor, autoclavable fixed angel and swinging rotors, three running programs can be stored;
    temperature set from -20°C up to +40°C;
    timer 1-99 min. speed: angle rotor 18.000 rpm at RCF of max. 31.867 x g
    swing out rotor 13.000 rpm at RCF of max 18.516 x g

    Specifications: temperature MZ005: -20°C bis +40°C; timer 1 - 99 minutes weight MZ005: 36 kg, dimension 178 x 333 x 620 mm (H x W x D)
    weight MZ005-UK: 16 kg, dimension 278 x 333 x 390mm (H x W x D)
    Cat. #DescriptionCapacity ml or mmRCFEuroUnits
    MZ005cooling centrifuge up to -20°C50 ml max. 3490,00
    MZ005-UKcentrifuge without cooling50 ml max. 1959,00
    MZ005-1154swing out rotor 90°24 x 0,5/1,5/2,0 ml18.5161245,80
    MZ005-1195Aangel rotor, aerosol tight24 x 0,5/1,5/2,0 ml31.514319,00
    MZ005-2024reduction for 0,2ml PCR tubes 1,50
    MZ005-2023reduction for 0,5ml tubes 1,50
    MZ005-1189Aangel rotor, aerosol tight30 x 0,5/1,5/2,0 ml21.255399,00
    MZ005-1158Langel rotor, aerosol tight48 x 1,5/2,0 ml21.255 outer row619,00
    MZ005-1160angel rotor for PCR-strips6 x 8x0,2 ml18.845389,00
    MZ005-1161drum rotor, 6-fold with lid60 x 1,5 ml14.150639,00
    MZ005-1377drum rack10 x 1,5/2,0 ml14.15032,00
    MZ005-1378drum rack32 x 0,4 ml Beckman14.15092,00
    MZ005-1379drum rack21 x 0,8 Bd oder 21 x 0,5 ml14.15068,00
    MZ005-1020swing out rotor for MZ005 only8x10 ml/17x70; 5 ml/12x75 2.879254,00
    MZ005-1015swing out rotor for MZ005 only12x15 ml/17x100; 12x5 ml/12x754.105427,00
    MZ005-1016angel rotor for MZ005 only6x50 ml/29x107; 3x50 ml/Falcon3.904419,00
    MZ005-1023Hematocrit-rotor with lid24 capillaries21.382254,00
     
    Universal 320, without or with refrigeration -20°C up to +40°C, 18.000 rpm
    These universal table centrifuge is useful for sedimentation of cells, bacteria, yeast, DNA/RNA and for proteinprecipitation. Universal 320 means perfectly smooth running at both high and low speeds, versatility, an enormous range of easily interchangable accessories and high RCF (23.907 for microtubes, 9.418 for 85 ml tubes). Tubes in volume from 0,2ml to 100ml, microtiterplates, haematocrit capillaries and ZYTO-accessories can be used at small lab-space. Extremly short run up- and run down times, impulse-button, RPM or RCF-setting in 10- steps as well as 3 runningprogramms make the centrifuge user friendly.
    Specifications: Temperaturerange MZ012: -20°C to +40°C; Timer 1-99 minutes
    weight MZ012: 52 kg, dimension 346 x 401 x 695 mm (H x W x D)
    weight MZ012-UK: 29 kg, dimension 346 x 395 x 520 mm (H x W x D)

    The complete assessories are available on request, please ask us for the possibilties for your tube, so far not listed.
    Kat. #DescriptionCapacity in ml RCFEuroUnits
    MZ012Cooling centrifuge to -20°C 100 ml max. 4.219,00
    MZ012-UKCentrifuge without cooling100 ml max. 2.219,00
    MZ012-1689AAngel rotor 45°aerosol tight30 x 0,5/1,5/2,0 ml21.255519,00
    MZ012-1612Angel rotor with lid12 x 0,5/1,5/2,0 ml16.602235,00
    MZ012-1613Angel rotor 12-place12x15 ml/17x100; 6x15 ml/Falcon4.146330,00
    MZ012-1420Angel rotor aerosoltight24 x 0,5/1,5/2,0 ml21.382298,00
    MZ012-1460Swing out rotor w/o suspension2-place MTP 2.093624,50
    MZ012-1453Suspension for 1 MTP-Platte for -1460 284,00
    MZ012-1645Swing out rotor4-place MTP1.896.473,00
    MZ012-4345suspension f. MZ012-1645 1 steel suspension 145,00
    MZ012-1617Swing out rotor w. suspension8 x 50 ml Falcon, 45°3.857448,00
    MZ012-1619Swing out rotor w. suspension6 x 50 ml Falcon, 90°2.701476,00
    MZ012-1462AAdapter for MZ012-1617/1619for use of 15ml Falcons 15,00
    MZ012-1624Swing out rotor4-place2.665348,00
    MZ012-1381Metal beaker for MZ012-16241 x100 ml 103,00
    MZ012-1650Hematocrit-rotor w.lid24 capillaries 314,00
    MZ012-1626Rotor for ZYTO suspensions 6-place2.093620,00
     
    Rotina 380, without or with refrigeration -20°C up to +40°C, 15.000 rpm, RCF up to 24.400
    The high performance bech-top centrifuges Rotina 38 impress by state-of-the-art technology, large capacity, extremely easy handling and exeptionally smooth and quiet running. They are mainly used in the fiels of diagnostic, genetic research and microbiology. Volumes from 0,2ml up to 250ml at large capacities as 10 x 50 ml Falcons, 48 x 15 ml or 4 x 250 ml are no problem. Extremly short run-up and run down times, impulse-button, RPM input in increments of 10 or RCF-input in increments of 1 as well as 3 running programms make this centrifuge very easy to operate.
    It features also high safety standards: metalhousing and -lid, automatic rotorrecognition, imbalance switsch of, lid locking and holding, emergency lid lock release, brushless induction drive.

    Specificationes: Temperature range MZ013: -20°C to +40°C; Timer 1-99 minutes
    weight MZ013: 73 kg, dimension 380 x 468 x 721 mm (H x B x D)
    weight MZ013-UK: 43 kg, dimension 380 x 468 x 563 mm (H x B x D)

    The complete assessories are available on request, please ask us for the possibilties for your tube, if not listed.
    Cat. #DescriptionCapacity ml RCFEuroUnits
    MZ013Cooling centrifuge up to -20°C250ml max. 4999,00
    MZ013-UKCentrifuge without cooling250ml max. 2.999,00
    MZ013-1789Angel rotor 45°aerosol tight30 x 0,5/1,5/2,0ml24.400550,00
    MZ013-1760Swing out rotor 45°2-place MTP, 45°2.075889,00
    MZ013-1753Suspension for MZ013-1760metal suspension 357,00
    MZ013-1717Swing out rotor 10-place 45°w. suspension f. 10 x 50ml Falcons4.556681,8
    MZ013-1462ASuspension for MZ013-1717for 15ml Falcons 15,00
    MZ013-1726Swing out rotor6-place 90°2.808516,00
    MZ013-1742Suspension for MZ013-17267x15ml/17x100 51,5
    MZ013-1748Rotor for ZYTO Becher8-place 681,00
    back to top
    © 1999 - 2010 Dipl.oec.troph.Gerlinde Kisker