Kisker Biotech
Filter Tip
Pipet Tips
Quali-
Tips, Gel- Loading Tips
PCR Tubes and Plates
Centrifuge Tubes
Rack Systems
Cryoproducts
Autoradiography
DNA-Workstation
& Hybridisation
Electropheresis
Dry block heat bath
Mini Centrifuges
Rotator & Vortex Mixer
Nylon Wool & PAP PEN
PCR & DNA Measurement
Microparticles
0,00 €
0

Rotator & Vortex Mixer

 
Microtiter plate-Thermo-Shaker
This unique Microplate shaker combines Shaking and Heating. It can either shake or heat or shake/heat at same time two/four microplates. It provides shaking action 250 - 1.200 rpm / 2 mm amplitude. The heat is transfered to the sample from the platform and the heated lid. This heating from both sides guarantees a very good temperature stability at low evaporation. The temperature can be regulated from 25 °C or RT up to 60°C at L079/L079-4.
New is the Thermo Shaker L079-100 with temparature range from 25°C to 100°C

Specifications:
  • all electronical functions including the 96 hour timer are microprocessor controled

  • shaking speed 250 to 1.200 rpm, to be set in steps of 10
  • amplitude 2mm

  • max. hight of plates 18 mm valid for all types

  • L079 weight 7,0 kg, dimension 270 x 260 x 125mm (W x D x H)

  • L079-100 weight 6,5 kg, dimension 270 x 260 x 125mm (W x D x H)

  • L079-4:weight 9 kg, dimension 380 x 390 x 140mm (W x D x H)

  • low voltage external power supply 12 volt, 4.16A

    		•
    Cat.#Description EuroUnits
    L079Shaker/Heater for2 MTP`s up to 60°C995,00
    L079-100Shaker/ Heater for2 MTP´s up to 100°C1.295,00
    L079-4Shaker/Heater for4 MTP`s up to 60°C1.495,00
     
    Thermo- Shaker for Micro- or Deep-Well-Plates
    V 2000 is a unique micro processor controlled shaker incubator for up to four microtitre plates. The three parameters, speed, temperature and time are programmed via the control panel. Count down remaining time as well as the other two parameters are displayed on the LCD. The plates remain visible to the user at all times under the clear protection cover. For added safety V 2000 is the only incubator on the market to work from a low voltage supply.

    V 2000 is available for all plate heights on request

    * Easy access to all four plates at all times for loading and unloading
    * Uniform heating via air circulation
    * Unique open construction for easy integration with robotic systems
    * Remote low voltage supply for your safety
    * Automatically adjusts to all voltage supplies from 100V to 240V, 50-60 Hz
    * Minimum bench space required
    * Easy to clean and maintain
    * upgradeable for deep well plates
    * Optimal temperature uniformity of plates
    Specificationes:Temperature range 5°C over RT to 45°C - uniformity +/- 1°C
    speed 500-1.300 rpm in 10 rpm steps, 3 mm orbit
    timer 1-9999 minutes in 1 minute steps
    operational conditions 12°C to 30°C
    weight 4,2 kg, dimensions 200 x 520 x 220 mm (W x D x H)
    Remote power supply 24V, 5.4A
    Cat.#Descrition EuroUnits
    L092Thermo- Shaker4 Microtestplates1.955,00
    L092-DWThermo- Shaker4 Deep-Well-Plates1.955,00
     
    Microplate Washer S200
    This microplate washer is the most user friendly manual washer on the market. The user can choose to process the plate either in ist storage position- on top of the pump unit or, down on the labtop surface. The unit provides a quiet and reliable operation in a compact format, accurate dispensing and low residual volumes, adjustable dispense pressure and aspirate force. Further features are
    filtered pump inlet and silenced outlet
    fully autoclavable, metal free fluid path
    colour coding for easy maintenance and system modularity
    extremly easy to clean, small footprint, compact in storage
    8 or 12 way wash heads, optional aspirate probes and fill manifolds
    12V DC remote power supply for piece of mind and added safety.

    A complete unit includes wash head, wash and waste bottles, pump unit, plate carrier, power supply and all tubing. Single modules are available for customers, who have already a vacuum pump.

    Specifications: operating voltage/Hz 100-240V 50-60 Hz, max. current requirement 9.6VA, weight 4 kg, dimensions complete system 250x370x33 mm (WxDxH)
    Cat.#DescriptionEuroUnits
    L0728-channel washer complete 1.298,00
    L07312-channel washer complete 1.349,00
    L072-8MCT8-way manifold + carrier + tubing433,00
    L073-12MCT12-way manifold + carrier + tubing470,00
    L072-8MCR8-way manifold + carrier + reservoir kit520,00
    L073-12MCR12-way manifold + carrier + reservoir kit573,00
    L072-8M8-way manifold263,00
    L073-12M12-way manifold291,00
     
    Microplate Washer A1000
    This microplate washer A1000 is a unique processor for the fully automated washing and filling of both, 96 and 384 well microplates, including deep well format. It is designed to achieve a fast and reliable microplate processing with high precision and repeatability, whilst allowing the user a multitude of individual adjustment possibilities.

    The unit provides:
    * accurate dispensing and low residual volumes
    * up to two wash reagents, each with its own fluid pathways
    * unique open construction for easy integration with robotic systems
    * Plate sweep for lowest residual volumes* Up to 30 user prgramable wash protocols
    optical liquid level sensing in all reservoirs with visual warning system
    * extremly easy to clean and maintain
    heads available in 8 and 12 way
    * External USB-port or RS232 port ensures robotic integration
    12V DC remote power supply for piece of mind and added safety

    technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, precision +/- 3% at 300 microliter, residual volume 3 microliter per well typical action or 1 microliter per well with sweep, dispensing volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 min, weight 9,2 kg, dimension 650x650x350 mm WxDxH.
    Cat.#DescriptionEuroUnits
    L075-88-channel washer A1000 2.980,00
    L075-1212-channel washer A1000 3.150,00
    L075-Wash-SWash -Level-Sensor95,00
    L075-Waste-SWaste -Level-Sensor95,00
    L075-ACAerosol Cover519,00
    L075-RPAdd. Reagent pump519,00
    L075-384Wash head 384 Step285,00
     
    Microplate Filler A500
    This microplate filler A500 is a unique processor for the fully automated filling of both, 96 and 384 well microplates of all possible formats. It is designed to achieve a fast and reliable microplate processing with high precision and repeatability, whilst allowing the user a multitude of individual adjustment possibilities.

    The unit provides:
    * accurate dispensing precision
    * up to 16 different, each with its own fluid pathways
    * unique open construction for easy integration with robotic systems
    * Up to 25 user prgramable wash protocols
    optical liquid level sensing in all reservoirs with visual warning system
    * extremly easy to clean and maintain
    * RS232 port ensures robotic integration
    * remote control PC software available

    technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, precision +/- 3% at 300 microliter, residual volume 3 microliter per well typical action or 1 microliter per well with sweep
    dispensing volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 min, weight 6 kg, dimension 650x650x350mm WxDxH.
    Cat.#DescriptionEuroUnits
    L093-88-channel filler4.550,00
    L093-1616-channel filler (96 and 384 well plates) 6.370,00
     
    Microplate-Shake for two or four Plates
    This small, compact unit provides shaking of two or four microplates for immuno assays and agglitunation test
    needs small footprint only, dimension 220x205x90 mm (wxdxh)
    rotating shaking with speed of 150-1.000 rpm, orbit 2 mm, digital time display, timer 0-24 hours with auto stopp
    working temperature +4°C to +45°C
    weight 2,5 kg
    Power supply 12Volt 500 mA, 110-230 Volt, 50/60 Hz
    Cat.#DescriptionEuroUnits
    L086microplate shaker for 2 plates298,00
    L086-A4platform for 4 MTP´s39,00
     
    Orbis "Personal Plate Shaker"
    New, the small handy microplate shaker for reliable efficient and long life operation
    Minimal footprint, dimensions 93x133x87mm (WxDxH)
    Open Construction for easy integration with robotic systems. Accomodates all styles of microplates. Momentary shaking action, no maintenance required. Brushless DC motor for quiet and reliable long life. Variable speed from 950 to 1300rpm, orbit 1mm

    Orbis plus with timer 1 to 180 minutes.

    Low Voltage for added safetey. Power supply 15Volt 100mA DC, 110-230 Volt, 50/60 Hz
    Cat.#DescriptionEuroUnits
    L070Microplate shaker259,00
    L071Microplate shaker with timer329,00
    L070-ATray for 40x1,5/2,0ml tubes45,00
    L070-DLid, clear Styrene33,00
     
    Personal Microplate Incubator
    The personal microplate incubator for reliable efficient and long life operation. Minimal footprint, dimensions 120x180x100mm (WxDxH).The use of unique design and advanced electronic temerature control circuitry guarantees an outstanding stable and accurate performance combined with quiet and long operating life.Temperature range 5°C above RT to 45°C, build in timer, accomodates all styles of microplates. minumum evaporation loses with uncovered plates, no maintenance required.

    Low Voltage for added safetey. Power supply 12Volt 2A DC, 100-230 Volt, 50/60 Hz, weight 920g.
    Cat.#DescriptionEuroUnits
    L078Microplate incubator426,00
     
    Microtiter plate-/ Multi-Well-Plate-/ Microcentrifugetube-Shaker
    The shaker provides rotary shaking action: L027/L028 50 - 1.250 rpm
    L029, L030 50 - 900 rpm
    4mm amplitude. It is useful for all application like gentle shaking for cultures and strong shaking for tubes and MTP`s. The Shaker is microprocessor controlled and has a constant speed also at high frequency. More important for many applications is the gentle starting of the shaking process, which avoids a strong disturbing or squirt out of the sample at the start of the shaking action.
    the display shows set and real speed
    weight 4,7kg, dimension 240 x 250 x 175mm (L x W x H)
    all come inclusive platforms, trays optional
    Cat.#Description EuroUnits
    L027Shaker for4 MTP`s609,00
    L028Shaker for8 MTP`s649,00
    L029Shaker for4 Multi-Well Plates609,00
    L030Shaker for4 x 20 1,5ml Tubes609,00
    L030-0.5Trays für 0,5ml Tubes5 pc52,50
    L030-1.5Trays für 1,5ml Tubes5 pc52,50
    L030-2.0Trays für 2,0ml Tubes5 pc52,50
     
    Mini 3D shaker
    A small 3D shaker - stainless steel housing, speed can be set stepless from 15 - 30 rpm, shaking angel 7°
    optional platform for 26 tubes available
    dimension: 150 x 85 x 100 mm
    loading capacity: 500 g, platform size: 200 x 200mm
    weight: 1,4 kg, power: 12Volt, 300mA
    Cat. #DecriptionPowerEuroUnits
    L0403D-Shaker220Volt/50Hz219,00
    L040-ATube Adapter 30,15
     
    Multi Dancer, the Multi-Talent
    an ideal shaker for agar-plating techniques
    reciprok-Shaking 0-360°, 30° increments, 0-250 sec timer
    3D-Shaking 0-360°
    Vortexing 0 - 6°, 1° increments, 0 - 5 sec-timer
    speed 5 - 30 rpm, rocking angel 7°
    progarmmable cycles with up to 125 repeats
    max. loading capacity 1kg
    Cat. #DecriptionPowerEuroUnits
    L045-NMulti Dancer12Volt, 500mA475,00
     
    MINI-Rocker
    A small rocker with variable shaking frequency from 7,5 - 30 rpm /min
    rocking angel of 7°
    the MINI-Rocker is equipped with a 0 - 24 hour timer and LED display.
    dimension: 220 x 205 x 90 mm (WxDxH), weight: 1,6 kg
    platform 200 x 200 mm, loading max. 500 g
    external power supply: 12 Volt, 500mA
    Cat. #DecriptionPowerEuroUnits
    L024MINI-Rocker12Volt 500mA295,00
     
    MIDI-Rocker and Orbital Shaker
  • A middle sized rocker with variable shaking speed from 5 - 100 rpm /min

  • rocking angel of 12°

  • loading capacity 15 kg



  • Orbitalshaker with shaking speed 5 - 200 rpm

  • loading capacity 10 kg



    • Specifications:
  • equipped with a 1 - 9999 minute timer and LED display

  • optional available with a second platform

  • dimension: 260 x 310 x 130 mm, weight: around 7,0 kg

  • platform 260 x 260 mm with anti-slip-mat

  • power supply: 230 Volt, 50 Hz
    		•
    Cat. #DecriptionPowerEuroUnits
    L026MIDI-Rocker230 V/ 50Hz585,00
    L026-OSOrbitalshaker230 V/ 50Hz645,00
    L026-Psecond platform 159,00
     
    Maxi Rocker
    A shaker in compact design with a smooth running, strong motor; platform with anti-slip mat. The shaker is very useful for cold rooms and rooms with high humidity
    dimension 300 x 300 mm, rocking angel 5,5° ( on request with 4,5 or 7,5° )
    variable speed of 12 - 50 rpm
    loading capacity 5 kg
    operating temperature from -5°C bis 60°C, maximum humidity 95%
    weight 7 kg, Dimensionen: 335 x335 x 190 mm
    Cat. #DecriptionPowerEuroUnits
    L047Maxi-Rocker220Volt/50Hz759,00
     
    Test Tube Rotator, variable speed
    The Test Tube Rotator provides diffusion, dialysis, extraction or mixing.

  • electronic controlled stepper motor provides speed from 5 - 50 rpm

  • timer set up of 0-99 hrs, 1-59 min

  • Test Tube Rotator is easy to handle through "Memory-" and "Restart"-functiones

  • exchangable discs for tubes from 4 - 40 mm

  • Angel of rotation can be set from 27° - 90°

  • adapters allows the simultaneous run of 2 or 3 discs

  • Specification: dimensions: 200 x 200 x 250 mm (LxWxH)

  • weight: 3,5 kg; Motor 230 Volt, 50-60 Hz
    		•
    Cat. #Descriptionquantity x tube ØEuroUnits
    L009Variable Rotator 545,00
    L009-4disc (0,5ml)40 x 4 - 9mm89,00
    L009-6disc 30 x 6 - 9mm79,00
    L009-9disc (1,5/2,0ml)20 x 9-12mm66,80
    L009-12disc (15ml)20 x 12-16mm66,80
    L009-16disc 20 x 16-19mm66,80
    L009-19disc 18 x 19-22mm66,80
    L009-22disc 15 x 22-25mm66,80
    L009-25disc (50ml)12 x 25-28mm66,80
    L009-28disc 10 x 28-32mm66,80
    L009-32disc10 x 32-40mm66,80
    L009-Aadapter159,00
     
    Test Tube Rotator
    For mixing, diffusion , dialysing, hybridisation etc.

    A synchronous motor with slow rotation speed of 10 rpm, which permits tube exchange while operating.
    The rotating disc can be set continously at an angle between 90 and 27°. The disc has a diameter of 200 mm and has chemical resistant clamps.

    The instrument has a weight of 4 kg, dimension is 200 x200 x 205 mm (l x w x h)

    For ordering discs please use discs from L009!
    Cat. #Description Quantity x tube ØEuroUnits
    L004Rotator230Volt,50-60Hz326,00
     
    Mini – Rotator, Standard
    This is a place saving mixer fore 22 microcentrifuge tubes or 22 x 15ml tubes with maximum 15mm diameter.
    Specification Standard Rotator: speed 5 – 30 rpm, maximum continous operation time is 8 hours, digital timer, LED display
    weight: 1,0 kg, dimension: 310 x 110 x 175 mm
    delivered: rotator with standard platform
    Cat. #DescriptionPowerEuroUnits
    L053Mini Rotator standard12 Volt/ 500mA329,00
    L053-16platform for 4 tubes up to 30mm Ø / 12 tubes up to 15mm Ø 35,00
     
    Mini – Multi-Rotator
    This is a place saving mixer for 22 x 1,5/2,0 ml microcentrifuge tubes or 22 x 15 ml tubes up to max. 15 mm Ø..
    Specification Standard Rotator:

    specification Multi-Rotator: functiones: rotation, vortexing 0-5°, reciprocal overheadmixing 15 - 90°,
    speed; 5 – 30 rpm
    continous run by 24 hour timer
    weight: 1,8kg, dimension 310 x 110 x 175mm
    Cat. #DescriptionPowerEuroUnits
    L054-NMulti Rotator12V,500mA429,00
    L054-4/12platform for 4x50/12x1,5-2,0-15ml 35,00
     
    Orbital Shaker
    Our traditional orbit shaker is now new designed with higher speed and more loading capacity. Advantages are also the "direct drive system" and a brushless motor with up to 35.000 hours operation before service would be necessary. The automatic loading balancing sytem makes it reliable for long non stop operation up to 96 hours.
    The unit with wide speed range, loading capacity of 3 kg and manifold choice of different platforms offers many applications in labs of microbiology, immunology, biochemistry and molecular biology.

    Specificationes:
  • Shaking speed 40 - 450 rpm

  • digital display and timer 1 min - 96 hours

  • orbit 10 mm

  • maximum loading capacity 3,0 kg

  • weight: 4,0 kg, dimension 220 x 205 x 90 mm
    		•
    Cat. #description Platform sizeEuroUnits
    L044-NOrbital Shaker12 Volt, 500 mA 539,00
    L044-Funiversal bottle platformwith 3 adjustable bars270 x 19589,00
    L044-F/6platform for6 x 250 - 300ml 250 x 19089,00
    L044-F/12platform for12 x 100 - 150ml250 x 19089,00
    L044-F/88Platform for88 tubes up to 30 mm diameter, 10-50 ml250 - 190199,00
    L044-Pplatform forpetridishes etc.220 x 22030,20
     
    Orbitalshaker - MULTI-POWER
    The Orbital shaker MULTI-POWER is an ideal instrument for intensive mixing of biological suspensiones or chemical componentes in bigger volumina with a total capacity of 15 kg. The shaker can be used continously during several days for extractions, tissue cultures, rotation of closed flasks for dialysis
    userfriendly processor controlled program, LCD-Display
    3-fold Modus: orbital, reciprocal-orbital, vibration

    Specificationes: Shaking speed 5 - 250 rpm
    digitale display and timer 1min-96 hours.
    Amplitude 20 mm, maxium load up 15,0 kg
    large platform withfixation rols 460 x 400 mm
    working temperature: 4 - 45°C, no wet-rooms
    weight: 19,3kg, dimension 485 x 520 x 140 mm
    Cat. #Description EuroUnits
    L048-NOrbital ShakerAC 12 V, 830mA1.795,00
    L048-Pplatform with Anti-slip-mat430 x 380 mm96,00
     
    Rock´N Roller
    The Rock´N Roller keeps samples in gental motion by rocking while rolling.

    14 stainless steel rotating bars guarantee an even mixing of samples. The 14 rolls, size 208 x 10 mm(L x Ø) are moved with 10 rpm, rocking frequency is 5 cycles /minute at 35° movement.

    Weight: 3 kg, dimensions: 330 x 300 x 190mm (L x W x H)

    L005-V has a variable roll- and rocking speed, which is controled by an external motor : 5 - 25 rpm; 2,5 -12,5 cycles/min

    L005-SL is a roller with 6 excentrical diagonal moving PVC-rolls, useful for bottles up to 1000 ml, constant rolling speed: circa 50 rpm The soft rocking causes a very care mixing, useful for blood, cell suspensions, chemical based fluids like colors, cosmetics, oils etc..
    Spezifikation: lenght of rolls 26mm, overall dimension: 380 x 270 x 100 mm (L x W x H)
    Cat. #DescriptionPowerEuroUnits
    L005Rock´N Roller220V, 50hz538,00
    L005-VRock´N Roller, variabel220V, 50hz698,00
    L005-SLRock´N Roller, heavy220V, 50hz469,00
     
    Rotary Mixer
    The Rotary Mixer provides serial rotation of test tubes with a diameter range from 4 - 27mm. The mixer has a stepless controllable motor with a speed of 5-50 rpm. All parts are from aluminium or stainless steal construction. The drums and bars are easy to exchange. The digital read out shows speed and time from 1-99 hrs, 1-59 min.. Easy handling is provided through "Memory-", "Restart-" und "autostop"-functions.

    Weight 3,3kg, dimensions 450 x 170 x 190mm(L x W x H), power 220volt/50Hz
    Cat. #DescriptionQuantity x tubeØEuroUnits
    L010Rotary-Mixer 569,00
    L010-16bar20 x 16-20mm98,95
    L010-19bar18 x 19-22mm98,95
    L010-22bar18 x 22-27mm98,95
    L010-4drum104 x 4 - 6mm299,00
    L010-6drum104 x 6 - 9mm299,00
    L010-9drum104 x 9-12mm299,00
    L010-12drum48 x 12-16mm189,00
    L010-912drum56 x 9-12mm210,00
     
    Programmable Overhead Mixer "Multi-Mix"
    The overhead mixer "Multi-Mix" is a quiet and reliable microprocessor controled unit for stirring up to 20 liters. "Multi-Mix" is usable up to seven days continously. Three types of motion, standard , reciprocal and vibration, garant a strong mixing of fluids up to the medium viscosity area. "Multi-Mix" is an ideal equipment for laboratrories in biotechnology, analytic and chemical synthesis. Powered by an external 12 V/800 mA AC/Adapter it is safe and economical. The combination of three motion types provides a high level of homogenicity due to combinatiobn of laminar and turbulent flows, which causes faster dissolving of substances.

    Specificationes:speed regulation range 40 - 1000 rpm
    Timer for reciprocal motion 0- 250 seconds
    Timer for vibration 0-5 secunds
    General-Timer 1 min - 96 hours
    dimensions 135 x 400 x 250 mm
    weight 2,5 kg
    power: 12 V/800 mA AC/Adapter
    Cat. #Description EuroUnits
    L085Multi-Mix 795,00
    L085-1Paddel stirrer70 x 70 mm39,00
    L085-2Propeller stirrer 2-blades60 mm Durchmesser39,00
    L085-3Propeller stirrer 3-blades50 mm Durchmesser39,00
    L085-4Anchor stirrerD= 90 mm, 48 mm Höhe39,00
    L085-5Centrifugal stirrerDurchmesser 50 mm39,00
     
    Disperging- and Homogenizing System for Molekular biology
    This special developed handy mixer for smallest quantities in Bio- and Gentechnology garants the best possible dispersion and homogenization. Samples of tissue will be changed in seconds to an analysis suited material, resulting in bigger amounts and quality of isolated RNA. The system is easy to handle because of the uncomplicated change of rotors. The hand-disperging-/homogenizing sytem is useful for volumens up to 100ml. Further systems are available up to 10.000ml. Technical details:

    speed 5.000 - 35.000min-1

    weight 600g

    power input 145 Watt, power output 73 Watt
    Kat.#DescriptionSpeed min -1Power WattWorking VolumeEuroUnits
    L080Miccra D-1 Antrieb15.000-35.000135100ml559,00
    L081Miccra D-3 Antrieb18.000 fix3505.000ml1.094,00
    L082Miccra D-8 Antrieb11.000-39.00085020.000ml838,00
    L083Miccra D-15 Antrieb8.500-34.5001.50050.000ml1.467,00
    Applicationdip in Working Volume
    L080-20DS-5/SK Zahnkranz 5mmsmallest volumes90-20mm0,1- 10ml676,00
    L080-100DS-8/P Zahnkranz 8mmtissue200-40mm1 - 100ml625,00
    L080-20/PGDS-20/PG Rotor 20mmsolid/fluid systemes200-40mm100-5.000ml468,00
    L080-20/PFDS-20/PF Rotor 20mmsolid/fluid systemes200-40mm100-5.000ml518,00
    L080-20/PG SmRDS-20/PG SmR cuttrotor 20mmfibrous materialies200-40mm100-3.000ml488,00
    L080-20/PF SmRDS-20/PF SmR cutrotor 20mmfibrous materialies200-40mm100-3.000ml538,00
    L080-30/PGDS-30/PG Rotor 30mmsolid/fluid systemes200-40mm250-10.000ml523,00
    L080-RW-30/PGRW-30/PG Mixrotor 30mmmix/cut200-40mm1.000-20.000ml563,00
     
    High Speed Vortexer for Tubes
    This flexible unit was designed, to fulfill the increasing inquirements regarding mixing of samples. The Vortexer can be used in a variety of applications as general microtube mixing, mixing of e. g. suspensions of cells and microorganisms, chemicas and espcialy when high speed vortexing is needed in DNA/RNA preparation steps in microcentrifuge or falcon tubes. For the preparation of sequencing steps is often high speed vortexing needed, which can be done with this vortexer up to 3.500 rpm.

    Shaking speed: 400 - 3.500 rpm, amplitude: 3 mm
    Timer 0- 60 minutes or non stopp ( maximum 8 hrs)
    Dimension: 145 x 170 x 180 mm, weight: 2,9 kg
    supply: vortexer without platform, please order platform separately
    Cat. #DescriptionEuroUnits
    L087High Speed Vortexer, power supply AC 12 Volt, 830 mA395,00
    L087-32platform for 16 x 1,5 ml - 8 x x0,5 ml - 8 x 0,2 ml tubes19,00
    L087-8/15platform for 8 x 15 ml tubes, D = 16 mm19,00
    L087-4/50platform für 4 x 50 ml tubes, D = 30 mm19,00
    L087-10/10platform für 10 x 10 ml tubes, D = 12 mm19,00
     
    MINI-Vortex
    A space saving instrument to mix small samples in tubes from 1,5 to 50 ml. The MINI-Vortex can be used continuesly or in the press-to-mix mode. Speed can be setted variable from 300 to 2.500 rpm
    Size: 90 x 150 x 80 mm ( W x D x H)
    Weight: 1,1 kg
    external Powersupply: 12 Volt/300 mA
    Cat. #DescriptionPowerEuroUnits
    L023MINI-Vortex12Volt/300mA139,00
     
    Tube Vortexer
    A very economical priced equipment for mixing 0,2 - 0,5 -1,5/2,0 ml microcentrifugentubes,e.g for vortexing of bacteria/yeast cultures and for DNA/RNA purification.
    Spezifikation: capacity 9 x 0,2 ml - 8 x 0,5 ml - 16 x 1,5/2,0 ml
    speed variabel 250 - 3.000 rpm, amplitude 2 mm
    dimension / weight 120 x 180 x 100mm / 1,5 kg
    Cat. #DesciptionPowerEuroUnits
    L055Tube Vortexer12Volt/500mA249,00
     
    Magnetic Stirrers and Hotplate Magnetic Stirrers
    electronical speed controlle, speed range from 50 bis 1.250 rpm, double housing of aluminium and thermovacuum formed plastic, coated with electrostaticly applied powder, which is corrosion resistant; stirring capacity 5 or 20 liter
    Specification: weight 2,2 kg, dimension 172 x 286 x 80 mm(L x W x H)
    stainless steel 155 mm Ø

    Magnetic stirrer with Aluminium-hotplate for stirring and heating at same time or indpendant.
    Temperature range is 50 - 325°C at 600 Watt,
    speed range 50 - 1.250 rpm Mixing/heating on 145mm plate of volumina up to 5/ 10/ 20 liters .
    The aluminium housing is equipped with M10 threated support rod connection. Working temperature is 5-50°C, allowed humidity is 90%
    Specification: weight 2,8 kg, dimension 172 x 286 x 125 mm (L x W x H)
    Cat.Nr.Descriptionmotor rating in/outEuroUnits
    L012-5Magnetic Stirrer 5 Liter22 / 2,2 Watt179,00
    L012-20Magnetic Stirrer 20 Liter13 / 5 Watt299,00
    L014-5Hotplate/Magnetic Stirrer 5 L22 / 2,2 Watt259,00
    L014-10Hotplate/Magnetic Stirrer10 L22 / 2,2 Watt335,00
    L014-20Hotplate/Magnetic Stirrer 20 L22 / 5 Watt379,00
     
    Mini-Magnetic Stirrer
    A small motor driven magnetic stirrer in a stainless steel housing with enough mixing power for many applications in the lab. Stepless speed regulation from 150 - 3000 rpm

    dimension: 120 x 150 x 65 mm
    dimension plate: 110 x110 mm
    mixing capacity: 2 liter
    weight: 1 kg
    external powersupply: 12Volt, 300 mA
    Cat. #descriptionElectrical requirementEuroUnits
    L025MINI-magnetic stirrer12Volt, 300mA139,00
     
    Multi Position Magnetic Stirrers
    All possibilities in one microprocessor controlled productline, all positiones individual to control:
    with or without heating
    4 or 6 positions - square or bench form
    hotplates made from 120mm stainless steel
    speed range 50 – 1200 rpm, energy 10 – 300 Watt/ Position
    Cat.#ConfigurationHotplatedimensionweight kgEuroUnits
    L0604-Position,bench formohne545 x 245 x 1107,2689,00
    L0616-Position,bench formohne830 x 245 x 11010789,00
    L0624-Position, squareohne335 x 400 x 1107689,00
    L0636-Position, quareohne 500 x 400 x 1109,8789,00
    L0644-Position,bench formmit545 x 245 x 1559,21.068,00
    L0656-Position,bench formmit830 x 245 x 15513,21.295,00
    L0664-Position, squaremit335 x 400 x 1559,41.068,00
    L0676-Position, squaremit500 x 400 x 155131.295,00
    back to top
    © 1999 - 2010 Dipl.oec.troph.Gerlinde Kisker