Kisker Biotech
Filter Tip
Pipet & Robotic Tips
Gel-
Loading Tips & Pipettors
PCR-,
HTS- & Tissue Culture Plastic
Micro- & Centrifuge Tubes
Syringe
Filters and Filter Plates
Rack Systems & Gloves
Cryoproducts
Autoradiography
DNA-Workstation,
Gel Documentation & Hybrid.
Electropheresis
Dry block heat bath
Mini & Tabel Centrifuges
Rotators,
Vortex , Plate Shakers
Cell Separation and PAP PEN
PCR - DNA & RNA Measurement
NanoPhotometer™
Microparticles
0,00 €
0

Rotators, Vortex , Plate Shakers

 
Microtiter plate-Thermo-Shaker
This unique Microplate shaker combines shaking and heating. It can either shake or heat or shake/heat at same time two/four microplates. It provides shaking action 250 - 1.200 rpm / 2 mm amplitude. The heat is transferred to the sample from the platform and the heated lid. This heating from both sides guarantees a very good temperature stability at low evaporation. The temperature can be regulated from 25°C or RT up to 60°C at L079/L079-4.
New is the Thermo Shaker L079-100 with temparature range from 25°C to 100°C

Specifications:
  • all electronical functions including the 96 hour timer are microprocessor controlled

  • shaking speed 250 to 1.200 rpm, to be set in steps of 10
  • amplitude 2mm

  • max. height of plates 18 mm valid for all types

  • L079 weight 7,0 kg, dimension 270 x 260 x 125mm (W x D x H)

  • L079-100 weight 6,5 kg, dimension 270 x 260 x 125mm (W x D x H)

  • L079-4:weight 9 kg, dimension 380 x 390 x 140mm (W x D x H)

  • low voltage external power supply 12 volt, 4.16A

    		•
    Cat.#Description EuroUnits
    L079Shaker/Heater for2 MTP`s up to 60°C995,00
    L079-100Shaker/ Heater for2 MTP´s up to 100°C1.295,00
    L079-4Shaker/Heater for4 MTP`s up to 60°C1.495,00
     
    Thermo- Shaker for Micro- or Deep-Well-Plates
    V 2000 is a unique micro processor controlled shaker incubator for up to four microtitre plates. The three parameters, speed, temperature and time are programmed via the control panel. Count down remaining time as well as the other two parameters are displayed on the LCD. The plates remain visible to the user at all times under the clear protection cover. For added safety V 2000 is the only incubator on the market to work from a low voltage supply.

    V 2000 is available for all plate heights on request

  • Easy access to all four plates at all times for loading and unloading

  • Uniform heating via air circulation

  • Unique open construction for easy integration with robotic systems

  • Remote low voltage supply for your safety

  • Automatically adjusts to all voltage supplies from 100V to 240V, 50-60 Hz

  • Minimum bench space required

  • Easy to clean and maintain

  • upgradeable for deep well plates

  • Optimal temperature uniformity of plates


    • Specifications:
  • Temperature range 5°C over RT to 45°C - uniformity +/- 1°C

  • speed 500-1.300 rpm in 10 rpm steps, 3 mm orbit
    timer 1-9999 minutes in 1 minute steps

  • operational conditions 12°C to 30°C

  • weight 4,2 kg, dimensions 200 x 520 x 220 mm (W x D x H)

  • Remote power supply 24V, 5.4A
    		•
    Cat.#Descrition EuroUnits
    L092Thermo- Shaker4 Microtestplates1.955,00
    L092-DWThermo- Shaker4 Deep-Well-Plates1.955,00
     
    96 well Microplate / Deep well / PCR-Plate Washer S200
    This manual plate washer is the most user friendly manual washer on the market. The user can choose to process the plate either is in storage position- on top of the pump unit or down on the labtop surface. The unit provides a quiet and reliable operation in a compact format, accurate dispensing and low residual volumes, adjustable dispense pressure and aspirate force. Further features are
    filtered pump inlet and silenced outlet.
  • Fully autoclavable, metal free fluid path

  • Colour coding for easy maintenance and system modularity

  • extremly easy to clean, small footprint, compact in storage

  • 8 or 12 way wash heads, optional aspirate probes and fill manifolds

  • 12V DC remote power supply for piece of mind and added safety


  • A complete unit includes wash head, wash and waste bottles, pump unit, plate carrier, power supply and all tubing. Single modules are available for customers, who have already a vacuum pump


    • Specifications:
    Operating voltage/Hz 100-240V 50-60 Hz, max. current requirement 9.6VA, weight 4,8 kg, dimensions complete system 250 x 300 x 250 mm (WxDxH)
    Cat.#DescriptionEuroUnits
    L0728-channel washer complete for microplates1.298,00
    L07312-channel washer complete for microplates1.349,00
    L072-DW8-Channel-Washer complete for deep well plates1.298,00
    L073-DW12-Channel Washer complete for Deep well Plates
    L072-PCR8-Channel Washer for PCR-Plates 1.298,00
    L073-PCR12-Channel Washer complete for PCR-Plates1.349,00
    L072-8MCT8-way manifold + carrier + tubing433,00
    L073-12MCT12-way manifold + carrier + tubing470,00
    L072-8MCR8-way manifold + carrier + reservoir kit520,00
    L073-12MCR12-way manifold + carrier + reservoir kit573,00
    L072-8M8-way manifold263,00
    L073-12M12-way manifold291,00
     
    Microplate Washer A1000
    This microplate washer A1000 is a unique processor for the fully automated washing and filling of both, 96 and 384 well microplates, including deep well format. It is designed to achieve a fast and reliable microplate processing with high precision and repeatability, whilst allowing the user a multitude of individual adjustment possibilities.

    The unit provides:
  • accurate dispensing and low residual volumes

  • up to two wash reagents, each with its own fluid pathways

  • unique open construction for easy integration with robotic systems

  • Plate sweep for lowest residual volumes

  • Up to 30 user prgramable wash protocols

  • optical liquid level sensing in all reservoirs with visual warning system

  • extremly easy to clean and maintain
    heads available in 8 and 12 way

  • External USB-port or RS232 port ensures robotic integration

  • 12V DC remote power supply for piece of mind and added safety


    • technical data:
    dispense reservoir 3 x 2 litres, waste reservoir 2 litres, precision +/- 3% at 300 microliter, residual volume 3 microliter per well typical action or 1 microliter per well with sweep, dispensing volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 min, weight 9,2 kg, dimension 650x650x350 mm WxDxH.
    Cat.#DescriptionEuroUnits
    L075-88-channel washer A1000 2.980,00
    L075-1212-channel washer A1000 3.150,00
    L075-Wash-SWash -Level-Sensor95,00
    L075-Waste-SWaste -Level-Sensor95,00
    L075-ACAerosol Cover519,00
    L075-RPAdd. Reagent pump519,00
    L075-384Wash head 384 Step285,00
     
    Microplate Filler A500
    This high precise and fast microplate filler A500 is a unique processor for the fully automated filling of both, 96 and 384 well microplates of all possible formats. It is designed to achieve a fast and reliable microplate processing with high precision and repeatability, whilst allowing the user a multitude of individual adjustment possibilities.

    The unit provides:
  • accurate dispensing precision

  • up to 16 different, each with its own fluid pathways

  • unique open construction for easy integration with robotic systems

  • Up to 25 user prgramable wash protocols

  • optical liquid level sensing in all reservoirs with visual warning system

  • extremly easy to clean and maintain

  • RS232 port ensures robotic integration

  • remote control PC software available


    • technical data:
  • dispense reservoir 3 x 2 litres, waste reservoir 2 litres
  • precision +/- 3% at 10 microliter

  • dispensing volume 55 - 400 microliter in 5 microliter increments
  • speed 10 seconds to fill a 96-well plate with 50 µl / well, 25 seconds to fill a 384 well plate with 50 ml / well
  • weight 4,5 kg
  • dimension 320 x 480 x 320mm WxDxH
    		•
    Cat.#DescriptionEuroUnits
    L093-88-channel filler4.550,00
    L093-1616-channel filler (96 and 384 well plates) 6.370,00
     
    8-Channel Microtiterplate Reader
    The plate reader can be operated using on board software via the membrane key panel or through a PC. Results can be printed utilising a dot-matrix printer connected directly to the printer port or to any printer which is connected to the PC.
    The software let you run up to 10 different assays per session with plates containing up to 12 standards and 12 controls. Assays can be configured and saved on the hard disc - ready for future use
    Individual data cards can be generated and all test results can be saved or printed out.

    The unit offers:
  • build in as standard two optical filters, 450nm and 630 nm

  • optional addition of two further filters

  • full on board controls or control via PC

  • accomodates all 96 well-plate types

  • 8 independent channels

  • quite and reliable

  • minimal footprint


    • Technical Data:
  • Lightsource: 8 independent tungsten bulbs

  • Detection: 8 silicon-photodiodes

  • Reading range: 405 - 700 nm

  • accuracy: +/- 1% from 0.001 to 1.500 OD
    +/- 2% from 1.500 to 3.000 OD

  • Result curves: direct plotting point to point, linear regression and four parameters

  • results calculation modes: OD, direct or calculated cut-off, single calibrator, programmable curves from 2 to 12 points

  • Reading time: 16 seconds/ full plate monochromatic reading, 32 seconds / full plate bichromatic reading

  • PC-interface: RS232-to PC Windows 98/ NT/ 2K/ XP

  • Printer-Interface: printer port for Dot-Matrix-printer

  • Dimension main unit: 200 x 577 x 240 mm (W x D x H), weight: 8,2 kg
    		•
    Cat. #DescriptionpowerEuroUnits
    L0938-Channel Reader230/110 Volt AC, 50/60 Hz, 110 Watt4.835,00
     
    Microplate-Shake for two or four Plates
    This small, compact unit provides shaking of two or four microplates for immuno assays and agglitunation test.
    Needs small footprint only, dimension 220x205x90 mm (wxdxh)
    rotating shaking with speed of 150-1.000 rpm, orbit 2 mm, digital time display, timer 0-24 hours with auto stop.
  • working temperature +5°C to +45°C

  • weight 2,5 kg

  • Power supply 12Volt 500 mA, 110-230 Volt, 50/60 Hz
    		•
    Cat.#DescriptionEuroUnits
    L086microplate shaker for 2 plates298,00
    L086-A4platform for 4 MTP´s39,00
     
    Orbis "Personal Plate Shaker"
    Whether for research laboratory or diagnostic kit manufacturer, the personal plate shaker is your natural choice. Laboratory bench space is costly and with a small footprint that is just marginally larger than that of the microplates the shaker offers the most economical and advanced solution for your shaking applications. For bigger demand 4-plate shaker is available too.

  • small handy microplate shaker

  • minimal footprint, dimensions:
    L070/71: 93 x 133 x 87 mm (W x D x H)
    L071-4: 230 x 365 x 110 mm (Wx D x H)

  • open construction for integration in robotic systems

  • easy microplate location by robot arm pick up

  • accomodates all styles of microplates in SBS – format

  • momentary shaking action

  • brushless DC motor for reliable long life

  • washable anti slip mat

  • variable speed: 950 – 1.300 rpm, orbit: 1 mm

  • optional with Timer: 1 – 180 min. (L071, L071-4)

  • environmental operating temperature: +10°C too +40°C

  • housing material: ABS

  • weight L070 / L071:715 g, L071-4: 3,1 kg


  • power supply L070/71:15V, 100 mA, DC, 230Volt, 50 / 60Hz
    L071-4:24 V, 400 mA, DC, 230Volt, 50 / 60Hz


  • pictured L071-4


    		•
    Cat.#DescriptionEuroUnits
    L070Microplate shaker259,00
    L071Microplate shaker with timer329,00
    L071-4Microplate shaker for 4 plates699,00
    L070-ATray for 40x1,5/2,0ml tubes45,00
    L070-DLid, clear Styrene33,00
     
    Personal Microplate Incubator
    The personal microplate incubator for reliable efficient and long life operation. Minimal footprint, dimensions 120x180x100mm (WxDxH).The use of unique design and advanced electronic temperature control circuitry guarantees an outstanding stable and accurate performance combined with quiet and long operating life. Minumum evaporation loses with uncovered plates, no maintenance required.

  • Spezifikation L078

  • Temperature range + 5°C above Rt to + 45°C
  • Temperature accuracy >+/-0,5°C of setted temperature
  • operating temperature +10 to +40°C
  • dimensions 120 x 180 x 100 mm (WxDxH), weight 920 g
  • Low Voltage for added safetey. Power supply 12Volt 2A DC, 100-230 Volt, 50/60 Hz, weight 920g

  • Spezifikation L078-4

  • Temperature range + 5°C above Rt to + 45°C
  • Temperature accuracy >+/-0,5°C of setted temperature
  • operating temperature range +10 to +40°C
  • dimensions 460 x 230 x 205 mm (WxDxH), weight 4,5 kg g
  • Low Voltage for added safetey. Power supply 12Volt 2A DC, 100-230 Volt, 50/60 Hz, weight 920g
    		•
    Cat.#DescriptionEuroUnits
    L078Microplate incubator426,00
    L078-DWDeep well Plate Incubator426,00
    L078-4Microplate incubator for 4 plates1.195,00
    L078-DW-4Deep well Plate Incubator for 4 Plates1.195,00
     
    Microtiter plate-/ Multi-Well-Plate-/ Microcentrifugetube-Shaker
    The shaker provides rotary shaking action: L027/L028 50 - 1.250 rpm
    L029, L030 50 - 900 rpm
    4mm amplitude. It is useful for all application like gentle shaking for cultures and strong shaking for tubes and MTP`s. The Shaker is microprocessor controlled and has a constant speed also at high frequency. More important for many applications is the gentle starting of the shaking process, which avoids a strong disturbing or squirt out of the sample at the start of the shaking action.
    the display shows set and real speed
    weight 4,7kg, dimension 240 x 250 x 175mm (L x W x H)
    all come inclusive platforms, trays optional
    Cat.#Description EuroUnits
    L027Shaker for4 MTP`s669,00
    L028Shaker for8 MTP`s699,00
    L029Shaker for4 Multi-Well Plates669,00
    L030Shaker for4 x 20 1,5ml Tubes669,00
    L030-0.5Trays für 0,5ml Tubes5 pc52,50
    L030-1.5Trays für 1,5ml Tubes5 pc52,50
    L030-2.0Trays für 2,0ml Tubes5 pc52,50
     
    Mini 3D shaker
    A small 3D shaker - stainless steel housing, speed can be set stepless from 15 - 30 rpm, shaking angel 7°
  • optional platform for 26 tubes available

  • dimension: 150 x 85 x 100 mm

  • loading capacity: 500 g, platform size: 200 x 200mm

  • weight: 1,4 kg, power: 12Volt, 300mA
    		•
    Cat. #DecriptionPowerEuroUnits
    L0403D-Shaker220Volt/50Hz219,00
    L040-ATube Adapter 30,15
     
    Multi Dancer, the Multi-Talent
    Ideal shaker for agar-plating techniques.
  • reciprok-Shaking 0-360°, 30° increments, 0-250 sec timer
    3D-Shaking 0-360°

  • Vortexing 0 - 6°, 1° increments, 0 - 5 sec-timer

  • speed 5 - 30 rpm, rocking angel 7°

  • progarmmable cycles with up to 125 repeats

  • max. loading capacity 1kg
    		•
    Cat. #DecriptionPowerEuroUnits
    L045-NMulti Dancer12Volt, 500mA475,00
     
    MINI-Rocker
    A small rocker with variable shaking frequency from 7,5 - 30 rpm /min
  • rocking angel of 7°

  • the MINI-Rocker is equipped with a 0 - 24 hour timer and LED display.

  • dimension: 220 x 205 x 90 mm (WxDxH), weight: 1,6 kg

  • platform 200 x 200 mm, loading max. 500 g

  • external power supply: 12 Volt, 500mA
    		•
    Cat. #DecriptionPowerEuroUnits
    L024MINI-Rocker12Volt 500mA295,00
    L024-ATube adapter for 26 tubes up to 11 mm diameter130,15
     
    MIDI-Rocker and Orbital Shaker
  • A middle sized rocker with variable shaking speed from 5 - 100 rpm /min

  • rocking angel of 12°

  • loading capacity 15 kg



  • Orbitalshaker with shaking speed 5 - 200 rpm

  • loading capacity 10 kg



    • Specifications:
  • equipped with a 1 - 9999 minute timer and LED display

  • optional available with a second platform

  • dimension: 260 x 310 x 130 mm, weight: around 7,0 kg

  • platform 260 x 260 mm with anti-slip-mat

  • power supply: 230 Volt, 50 Hz
    		•
    Cat. #DecriptionPowerEuroUnits
    L026MIDI-Rocker230 V/ 50Hz695,00
    L026-OSOrbitalshaker230 V/ 50Hz695,00
    L026-Psecond platform 195,00
     
    Maxi Rocker
    A shaker in compact design with a smooth running, strong motor; platform with anti-slip mat. The shaker is very useful for cold rooms and rooms with high humidity
    dimension 300 x 300 mm, rocking angel 5,5° (on request with 4,5 or 7,5°)
  • variable speed of 12 - 50 rpm

  • loading capacity 5 kg

  • operating temperature from -5°C bis 60°C, maximum humidity 95%

  • weight 7 kg, Dimensionen: 335 x335 x 190 mm
    		•
    Cat. #DecriptionPowerEuroUnits
    L047Maxi-Rocker220Volt/50Hz759,00
     
    Test Tube Rotator, variable speed
    The Test Tube Rotator provides diffusion, dialysis, extraction or mixing.

  • electronic controlled stepper motor provides speed from 5 - 50 rpm

  • timer set up of 0-99 hrs, 1-59 min

  • Test Tube Rotator is easy to handle through "Memory-" and "Restart"-functions

  • exchangable discs for tubes from 4 - 40 mm

  • Angel of rotation can be set from 27° - 90°

  • adapters allows the simultaneous run of 2 or 3 discs

  • dimensions: 200 x 200 x 250 mm (LxWxH)

  • weight: 3,5 kg; Motor 230 Volt, 50-60 Hz
    		•
    Cat. #Descriptionquantity x tube ØEuroUnits
    L009Variable Rotator 545,00
    L009-4disc (0,5ml)40 x 4 - 9mm89,00
    L009-6disc 30 x 6 - 9mm79,00
    L009-9disc (1,5/2,0ml)20 x 9-12mm66,80
    L009-12disc (15ml)20 x 12-16mm66,80
    L009-16disc 20 x 16-19mm66,80
    L009-19disc 18 x 19-22mm66,80
    L009-22disc 15 x 22-25mm66,80
    L009-25disc (50ml)12 x 25-28mm66,80
    L009-28disc 10 x 28-32mm66,80
    L009-32disc10 x 32-40mm66,80
    L009-Aadapter159,00
     
    Test Tube Rotator
    For mixing, diffusion , dialysing, hybridisation etc.

    A synchronous motor with slow rotation speed of 10 rpm, which permits tube exchange while operating.
    The rotating disc can be set continuously at an angle between 90 and 27°. The disc has a diameter of 200 mm and has chemical resistant clamps.

    The instrument has a weight of 4 kg, dimension is 200 x200 x 205 mm (l x w x h)

    For ordering discs please use discs from L009!
    Cat. #Description Quantity x tube ØEuroUnits
    L004Rotator230Volt,50-60Hz326,00
     
    Mini – Rotator, Standard
    This is a place saving mixer fore 22 microcentrifuge tubes or 22 x 15ml tubes with maximum 15mm diameter.
    Specification Standard Rotator: speed 5 – 30 rpm, maximum continous operation time is 8 hours, digital timer, LED display
    weight: 1,0 kg, dimension: 310 x 110 x 175 mm
    delivered: rotator with standard platform
    Cat. #DescriptionPowerEuroUnits
    L053Mini Rotator standard12 Volt/ 500mA329,00
    L053-16platform for 4 tubes up to 30mm Ø / 12 tubes up to 15mm Ø 35,00
     
    Mini – Multi-Rotator
    This is a place saving mixer for 26 x 1,5/2,0 ml microcentrifuge tubes or 26 x 15 ml tubes up to max. 15 mm Ø..
    Specification Standard Rotator:

    specification Multi-Rotator: functions: rotation, vortexing 0-5°, reciprocal overheadmixing 15 - 90°,

    speed: 1 – 100 rpm

    continuous run by 24 hour timer, maximum loading 500 g

    weight: 1,8kg, dimension 310 x 110 x 175mm
    Cat. #DescriptionPowerEuroUnits
    L054-NMulti Rotator with Standard Platform, 26 placesDC 12V, 1.25 A429,00
    L054-4/12platform for 5 x 50 ml tubes /12 x 1,5 - 2,0 - 15ml 39,00
    L054-10Platform for 10 tubes up to 30 mm D (50 ml)39,80
     
    Orbital Shaker
    Our traditional orbit shaker is now new designed with higher speed and more loading capacity. Advantages are also the "direct drive system" and a brushless motor with up to 35.000 hours operation before service would be necessary. The automatic loading balancing sytem makes it reliable for long non stop operation up to 96 hours.
    The unit with wide speed range, loading capacity of 3 kg and manifold choice of different platforms offers many applications in labs of microbiology, immunology, biochemistry and molecular biology.

    Specifications:
  • Shaking speed 40 - 450 rpm

  • digital display and timer 1 min - 96 hours

  • orbit 10 mm

  • maximum loading capacity 3,0 kg

  • weight: 4,0 kg, dimension 220 x 205 x 90 mm
    		•
    Cat. #description Platform sizeEuroUnits
    L044-NOrbital Shaker12 Volt, 500 mA 539,00
    L044-Funiversal bottle platformwith 3 adjustable bars270 x 195103,00
    L044-F/6platform for6 x 250 - 300ml 250 x 19099,00
    L044-F/12platform for12 x 100 - 150ml250 x 190129,00
    L044-F/88Platform for88 tubes up to 30 mm diameter, 10-50 ml250 - 190273,00
    L044-Pplatform forpetridishes etc.220 x 22034,90
     
    Orbitalshaker - MULTI-POWER
    The Orbital shaker MULTI-POWER is an ideal instrument for intensive mixing of biological suspensions or chemical componentes in bigger volumina with a total capacity of 8 kg. The shaker can be used continuously during several days (Maximum 7 days) for extractions, tissue cultures, rotation of closed flasks for dialysis.

    The shaker is easy to use, program changes can be done during operation. The 12 Volt external powersupply causes low energy demand and provides additional safety.

  • user friendly processor controlled program
  • 3-fold Modus: orbital, reciprocal-orbital, vibration

    Specifications:
  • Shaking speed 20 - 250 rpm

  • digital display and timer 1 min-96 hours

  • orbit 20 mm, maxium load up 8,0 kg

  • large platform with fixation rolls

  • surrounding working temperature: 5 - 45°C, no wet-rooms

  • power DC 12 Volt, 4,16 A

  • weight: 14 kg, dimension 410 x 410 x 130 mm
    		•
    Cat. #Description dimensions mmEuroUnits
    L048-NOrbital Shaker998,00
    L048-FPlatform with adjustable bars345 x 430 x 105397,00
    L048-F/30Platform with holders for 30 x 100 ml flasks360 x 400440,00
    L048-F/16Platform with holders for 16 x 250 ml flasks360 x 400319,00
    L048-F/9Platform with holders for 9 x 500 ml flasks360 x 400269,00
    L048-F/6Platform with holders for 6 x 1000 ml flasks360 x 400499,00
    L048-Pplatform with Anti-slip-mat480 x 380 mm119,00
     
    Rock´N Roller
    The Rock´N Roller keeps samples in gental motion by rocking while rolling.

    L005:
    14 stainless steel rotating bars guarantee an even mixing of samples. The 14 rolls, size 208 x 10 mm(L x Ø) are moved with 10 rpm, rocking frequency is 5 cycles /minute at 35° movement.

    Specifications:
  • moving speed 10 rpm
    • rocking frequency 5 cycles /minute at 35°
  • Weight: 3 kg
  • dimensions: 330 x 300 x 190mm (L x W x H)


    • L005-V:
    has a variable roll- and rocking speed, which is controlled by an external motor.

    Specifications:
  • moving speed 5 - 25 rpm
    • rocking frequency 5 - 12,5 cycles /minute at 35°
  • Weight: 3 kg
  • dimensions: 330 x 300 x 190mm (L x W x H)


    • External Motor:
  • dimensions 150 x 140 x 70 mm
    • weight 1,2 kg
    Cat. #DescriptionPowerEuroUnits
    L005Rock´N Roller220V, 50hz548,00
    L005-VRock´N Roller, variabel220V, 50hz728,00
     
    Rotating Mixers, universal
    These units provide even and careful mixing of suspensions, sampels of whole blood but also - due to high charging capacity - mixing or avoiding sedimentations of oil, cosmetiks and paints.

    The five or ten PVC rolls are designed as synchronous rotating surface for bottles, while moving up and down gently at same time.

    As speciality single rolls can be taken out at L005-SLN and L005-10-SLN for use of larger bottles.

  • five or ten excentric, diagonal moving PVC-rolles

  • useful for manifold bottles and tubes

  • constant speed: around 35 or variabel 2-30 rpm

  • useful for whole blood and other hematological determinations and cell suspensions


  • Specifications 5-roll units
  • loading: max. 2 kg
  • lenght of rolls: 320 mm

  • dimensions: 430 x 180 x 95 mm (L x B x H), weight 3,7 kg


  • Specifications 10-roll units
  • loading: max. 3 kg
  • lenght of rolls: 324 mm

  • dimensions: 436 x 180 x 105 mm (L x B x H), Gewicht 7,6 kg




  • power: 220 – 230 V, 50 Hz

    		•
    L005-10-SLN
    L005-5
    Cat. Nr.DescriptionSpeedRollsEurounits
    L005-SLNRotating Mixer Universal35 rpm5 / to take out599,00
    L005-10-SLNUniversal-Rotating Mixer2 - 30 rpm10 / to take out1.095,00
    l005-5Universal-Rotating Mixer35 rpm5 / not to take out479,00
    L005-5-VSUniversal-Rotating Mixer2 - 30 rpm5 / not to take out529,00
     
    Rotary Mixer
    Cat. Nr.DescriptionRotating Mixer, universalEuroUnits
    The Rotary Mixer provides serial rotation of test tubes with a diameter range from 4 - 27mm. The mixer has a stepless controllable motor with a speed of 5-50 rpm. All parts are from aluminium or stainless steel construction. The drums and bars are easy to exchange. The digital read out shows speed and time from 1-99 hrs, 1-59 min. Easy handling is provided through "Memory-", "Restart-" und "autostop"-functions.

    Weight 3,3kg, dimensions 450 x 170 x 190mm(L x W x H), power 220volt/50Hz
    Cat. #DescriptionQuantity x tubeØEuroUnits
    L010Rotary-Mixer 594,00
    L010-16bar20 x 16-20mm98,95
    L010-19bar18 x 19-22mm98,95
    L010-22bar18 x 22-27mm98,95
    L010-4drum104 x 4 - 6mm299,00
    L010-6drum104 x 6 - 9mm299,00
    L010-9drum104 x 9-12mm299,00
    L010-12drum48 x 12-16mm189,00
    L010-912drum56 x 9-12mm210,00
     
    Programmable Overhead Mixer "Multi-Mix"
    The overhead mixer "Multi-Mix" is a quiet and reliable microprocessor controlled unit for stirring up to 20 liters. "Multi-Mix" is usable up to seven days continuously. Three types of motion, standard, reciprocal and vibration, guarantee a strong mixing of fluids up to the medium viscosity area. "Multi-Mix" is an ideal equipment for laboratrories in biotechnology, analytic and chemical synthesis. Powered by an external 12 V/800 mA AC/Adapter it is safe and economical. The combination of three motion types provides a high level of homogenicity due to combination of laminar and turbulent flows, which causes faster dissolving of substances.

    Specifications:
  • speed regulation range 40 - 1000 rpm

  • Timer for reciprocal motion 0- 250 seconds

  • Timer for vibration 0-5 secunds

  • General-Timer 1 min - 96 hours

  • dimensions 135 x 400 x 250 mm

  • weight 2,5 kg

  • power: 12 V/800 mA AC/Adapter
    		•
    Cat. #Description EuroUnits
    L085Multi-Mix 795,00
    L085-1Paddel stirrer70 x 70 mm39,00
    L085-2Propeller stirrer 2-blades60 mm Durchmesser39,00
    L085-3Propeller stirrer 3-blades50 mm Durchmesser39,00
    L085-4Anchor stirrerD= 90 mm, 48 mm Höhe39,00
    L085-5Centrifugal stirrerDurchmesser 50 mm39,00
     
    Disperging- and Homogenizing System for Molekular biology
    This special developed handy mixer for smallest quantities in bio- and gentechnology guarantees the best possible dispersion and homogenization. Samples of tissue will be changed in seconds to an analysis suited material, resulting in bigger amounts and quality of isolated RNA. The system is easy to handle because of the uncomplicated change of rotors. The hand-disperging-/homogenizing sytem is useful for volumens up to 100ml. Further systems are available up to 10.000ml. Technical details:

    speed 5.000 - 35.000min-1

    weight 600g

    power input 145 Watt, power output 73 Watt
    Kat.#DescriptionSpeed min -1Power WattWorking VolumeEuroUnits
    L080Miccra D-1 Antrieb15.000-35.000135100ml559,00
    L081Miccra D-3 Antrieb18.000 fix3505.000ml1.094,00
    L082Miccra D-8 Antrieb11.000-39.00085020.000ml838,00
    L083Miccra D-15 Antrieb8.500-34.5001.50050.000ml1.467,00
    Applicationdip in Working Volume
    L080-20DS-5/SK Zahnkranz 5mmsmallest volumes90-20mm0,1- 10ml676,00
    L080-100DS-8/P Zahnkranz 8mmtissue200-40mm1 - 100ml625,00
    L080-20/PGDS-20/PG Rotor 20mmsolid/fluid systemes200-40mm100-5.000ml468,00
    L080-20/PFDS-20/PF Rotor 20mmsolid/fluid systemes200-40mm100-5.000ml518,00
    L080-20/PG SmRDS-20/PG SmR cuttrotor 20mmfibrous materialies200-40mm100-3.000ml488,00
    L080-20/PF SmRDS-20/PF SmR cutrotor 20mmfibrous materialies200-40mm100-3.000ml538,00
    L080-30/PGDS-30/PG Rotor 30mmsolid/fluid systemes200-40mm250-10.000ml523,00
    L080-RW-30/PGRW-30/PG Mixrotor 30mmmix/cut200-40mm1.000-20.000ml563,00
     
    High Speed Vortexer for Tubes
    This flexible unit was designed, to fulfill the increasing inquirements regarding mixing of samples. The Vortexer can be used in a variety of applications as general microtube mixing, mixing of e. g. suspensions of cells and microorganisms, chemicals and espcially when high speed vortexing is needed in DNA/RNA preparation steps in microcentrifuge or falcon tubes. For the preparation of sequencing steps is often high speed vortexing needed, which can be done with this vortexer up to 3.500 rpm.

    Shaking speed: 400 - 3.500 rpm, amplitude: 3 mm
    Timer 0- 60 minutes or non stopp ( maximum 8 hrs)
    Dimension: 145 x 170 x 180 mm, weight: 2,9 kg
    supply: vortexer without platform, please order platform separately
    Cat. #DescriptionEuroUnits
    L087High Speed Vortexer, power supply AC 12 Volt, 830 mA395,00
    L087-32platform for 16 x 1,5 ml - 8 x x0,5 ml - 8 x 0,2 ml tubes19,00
    L087-8/15platform for 8 x 15 ml tubes, D = 16 mm19,00
    L087-4/50platform für 4 x 50 ml tubes, D = 30 mm19,00
    L087-10/10platform für 10 x 10 ml tubes, D = 12 mm19,00
     
    MINI-Vortex
    A space saving instrument to mix small samples in tubes from 1,5 to 50 ml. The MINI-Vortex can be used continuously or in the press-to-mix mode. Speed can be setted variable from 300 to 2.500 rpm
    Size: 90 x 150 x 80 mm ( W x D x H)
    Weight: 1,1 kg
    external Powersupply: 12 Volt/300 mA
    Cat. #DescriptionPowerEuroUnits
    L023MINI-Vortex12Volt/300mA139,00
     
    Power-Mix
    "Power – Mix" is an universal vortex mixer for test tubes of 7 to 35 mmØ. The instrument can be used in "Press-to-mix" action or continously.
    The infinitely variable speed can be controlled up to 2.500.
    By using additional accessories, 96 well plates as well as 20 x 1,5 ml centrifuge tubes can be mixed at the same time.

  • Specifications: weight 3,2 kg, dimensions: 135 x 120 x 135 mm (L x W x H)


  • delivered as: „Power-Mix“ with standard set up for tubes from 7 to 35 mm
    		•
    Cat. #DescriptionEuroUnit
    L002Power-Mix218,00
    L002-MTPmicrotest plate holder for 1 plate41,85
    L002-MRTmini-reaction-tube holder for 20 tubes55,00
    L002-1TTHone-position-test-tube-holder for 20 x 200 mm tubes37,00
    L002--2TTHmulti-position-holder for 7 tubes 18 x 120 mm95,90
    L002-UKPuniversal-contact plate21,35
     
    Tube Vortexer
    A very economical priced equipment for mixing 0,2 - 0,5 -1,5/2,0 ml microcentrifugentubes,e.g for vortexing of bacteria/yeast cultures and for DNA/RNA purification.
    Spezifikation: capacity 9 x 0,2 ml - 8 x 0,5 ml - 16 x 1,5/2,0 ml
    speed variabel 250 - 3.000 rpm, amplitude 2 mm
    dimension / weight 120 x 180 x 100mm / 1,5 kg
    Cat. #DesciptionPowerEuroUnits
    L055Tube Vortexer12Volt/500mA249,00
     
    Magnetic Stirrers and Hotplate Magnetic Stirrers
    electronical speed controll, speed range from 50 bis 1.250 rpm, double housing of aluminium and thermovacuum formed plastic, coated with electrostaticly applied powder, which is corrosion resistant; stirring capacity 5 or 20 liter
    Specification: weight 2,2 kg, dimension 172 x 286 x 80 mm(L x W x H)
    stainless steel 155 mm Ø

    Magnetic stirrer with Aluminium-hotplate for stirring and heating at same time or independant.
    Temperature range is 50 - 325°C at 600 Watt,
    speed range 50 - 1.250 rpm Mixing/heating on 145mm plate of volumina up to 5/ 10/ 20 liters.
    The aluminium housing is equipped with M10 threated support rod connection. Working temperature is 5-50°C, allowed humidity is 90%
    Specification: weight 2,8 kg, dimension 172 x 286 x 125 mm (L x W x H)
    Cat.Nr.Descriptionmotor rating in/outEuroUnits
    L012-5Magnetic Stirrer 5 Liter22 / 2,2 Watt189,00
    L012-20Magnetic Stirrer 20 Liter13 / 5 Watt309,00
    L014-5Hotplate/Magnetic Stirrer 5 L22 / 2,2 Watt269,00
    L014-10Hotplate/Magnetic Stirrer10 L22 / 2,2 Watt339,00
    L014-20Hotplate/Magnetic Stirrer 20 L22 / 5 Watt399,00
     
    Mini-Magnetic Stirrer
    A small motor driven magnetic stirrer in a stainless steel housing with enough mixing power for many applications in the lab. Stepless speed regulation from 150 - 3000 rpm

    dimension: 120 x 150 x 65 mm
    dimension plate: 110 x110 mm
    mixing capacity: 2 liter
    weight: 1 kg
    external powersupply: 12Volt, 300 mA
    Cat. #descriptionElectrical requirementEuroUnits
    L025MINI-magnetic stirrer12Volt, 300mA139,00
     
    Multi Position Magnetic Stirrers
    All possibilities in one microprocessor controlled productline, all positions individual to control:
    with or without heating
    4 or 6 positions - square or bench form
    hotplates made from 120mm stainless steel
    speed range 50 – 1200 rpm, energy 10 – 300 Watt/ Position
    Cat.#ConfigurationHotplatedimensionweight kgEuroUnits
    L0604-Position,bench formohne545 x 245 x 1107,2689,00
    L0616-Position,bench formohne830 x 245 x 11010789,00
    L0624-Position, squareohne335 x 400 x 1107689,00
    L0636-Position, quareohne 500 x 400 x 1109,8789,00
    L0644-Position,bench formmit545 x 245 x 1559,21.068,00
    L0656-Position,bench formmit830 x 245 x 15513,21.295,00
    L0664-Position, squaremit335 x 400 x 1559,41.068,00
    L0676-Position, squaremit500 x 400 x 155131.295,00
    back to top
    © 1999 - 2011 Dipl. oec. troph. Gerlinde Kisker