210.00 €
×
Print or save as PDF
You will be redirected to your browser's interface for printing and saving as a PDF.
Choose the option that's best for you from the "Destination" drop-down menu.
Availability details
036455 · Protection filter Vacu-Guard 150 activated carbon Whatman
Available quantity : 0
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.
036455 · Protection filter Vacu-Guard 150 activated carbon Whatman
For the protection of vacuum or pressurized systems to reduce the risk of exposure to hazardous vapors
0.2 µm PTFE membrane providing >99.99% retention of airborne particles ≥0.1 µm in size
Available media:
• activated carbon: very high porosity for adsorption of odors carried by gases and vapors
• molecular sieve: crystalline aluminosilicate media for gas drying and retention of molecules up to 4 Å
• desiccant: anhydrous calcium sulfate media impregnated with calcium chloride. Inert toward most reagents except water. Allows very rapid drying due to a high adsorption capacity. The media does not swell, shrink, or disintegrate during use. The media changes from blue to pink when the cartridge is saturated
0.2 µm PTFE membrane providing >99.99% retention of airborne particles ≥0.1 µm in size
Available media:
• activated carbon: very high porosity for adsorption of odors carried by gases and vapors
• molecular sieve: crystalline aluminosilicate media for gas drying and retention of molecules up to 4 Å
• desiccant: anhydrous calcium sulfate media impregnated with calcium chloride. Inert toward most reagents except water. Allows very rapid drying due to a high adsorption capacity. The media does not swell, shrink, or disintegrate during use. The media changes from blue to pink when the cartridge is saturated
ModelVACU-GUARD 150 Activated Carbon
MaterialMedia: PTFE
Gross weight0,35 kg
Additional descriptionChemistry: activated carbon
Specific flow rate (SLPM) at 0.1 bar: 210 / Specific flow rate (SLPM) at 0.5 bar: 450
Specific flow rate (SLPM) at 0.1 bar: 210 / Specific flow rate (SLPM) at 0.5 bar: 450
Ambient conditionsMaximum operating pressure:
• Dry gas: 4 bar
• Wet gas: 1 bar
• Dry gas: 4 bar
• Wet gas: 1 bar
DimensionsSurface area: 82,000 m²
Gross dimensions28,00 x 7,00 x 7,50 cm
UNSPSC Code41104908
036455 - Manufacturer data sheetProduct(s) associated with this accessory
For protecting vacuum pumps to prevent damage to the essential components in case of liquid backflow. The filter body is made from pure polypropylene and incorporates a PTFE membrane.
You may be also interested in these categories
Filter paperSyringe filterMembrane filterFiltration unitFilter capsuleFiltration funnelFiltration plateFiltration systemSyringe-less filter for HPLCAccessory for filtrationFiltration manifoldFiltration supportBüchner funnelVent filterVacuum vialPre-filterComplete filtration unitAccessory for filtration systemReceiver flask for filtration unitGeneral-purpose paperQualitative analytical filter paperComplete filtration systemJoseph paperFibreglass paperQuartz fibre paperExtraction cartridge
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.