Filtration Filters Syringe filters ClearLine syringe filters®

ClearLine syringe filters®

• 9 types of membranes to meet all needs
• Diameter from 13 to 33 mm
• Sterile or non-sterile
• Sterile or non-sterile
• Colour code according to membrane
• Polypropylene body
• Female luer lock inlet/ male luer outlet
• Gamma ray sterilisation
• Version with pre-filter for loaded solutions

Whatman Chemical Compatibility Chart

Find out more about

Variants and accessories

PES

MCE

PVDF

NYLON

PTFE

AC - Cellulose acetate
• Hydrophilic membrane
• Low protein adsorption
• Limited solvent resistance
• Flow rate at 0.45 µm: 92 - 116 ml/min@10psi
• Bubble point at 0.45 µm: 36 - 39 psi
• pH: 3 - 7

PES - Polyethersulfone
• High flow hydrophilic membrane
• High thermal resistance
• Low aspecific adsorption of proteins
• For rapid filtration of viscous solutions
• Flow rate at 0.45 µm: 118 - 162 ml/min@10psi
• Bubble point at 0.45 µm: 42 - 49 psi
• pH: 4 - 8

MCE - Mixed Cellulose Esters
• Hydrophilic membrane
• Biologically inert
• Flow rate at 0.45 µm: 85 - 116 ml/min@10psi
• Bubble point at 0.45 µm: 25 - 33 psi
• pH: 4 - 8

PVDF - Polyvinylidene
• Hydrophilic membrane for protein-loaded solutions
• Very low protein adsorption
• Good resistance to solvents
• Flow rate at 0.45 µm: 70 - 105 ml/min@10psi
• Bubble point at 0.45 µm: 11 - 23 psi
• pH: 1 - 14

RC - Regenerated Cellulose
• Hydrophilic membrane
• Broad chemical compatibility
• Good particle extraction capacity
• Flow rate at 0.45 µm: 53 - 74 ml/min@10psi
• Bubble point at 0.45 µm: 45 - 49 psi
• pH: 3 - 12

NYL - Polyamide
• Hydrophilic membrane
• Good chemical resistance
• Flow rate at 0.45 µm: 47 - 55 ml/min@10psi
• Bubble point at 0.45 µm: 27 - 33 psi
• pH: 3 - 14

PP - Polypropylene
• Hydrophobic membrane
• Air and solvent filtration
• High throughput
• Flow rate at 0.45 µm: 550 - 635 ml/min@10psi
• Bubble point at 0.45 µm: -
• pH: 1 - 14

PTFE - Polytetrafluoroethylene
• Hydrophobic membrane
• Air and solvent filtration
• High chemical resistance
• Flow rate at 0.45 µm: 90 - 102 ml/min@10psi
• Bubble point at 0.45 µm: 10 - 13 psi
• pH: 1 - 14

FV - Fiberglass
• Pre-filtration of charged solutions
• Non-sterile
• High chemical compatibility
• pH 1-14

You may be also interested in these products

Puradisc Whatman non-sterile syringe filters™

Syringe filters ClearLine®

Puradisc syringe filters

Whatman ReZist™ Syringe Filters

Syringe Filters Whatman Anotop™

Whatman Roby™ Syringe Filters

Whatman GD/X syringe filters with prefilter

Whatman GD/XP™ Syringe Filters

Whatman SPARTAN™ Syringe Filters

Anotop syringe filter

Whatman UNIFLO Syringe Filters

Millex syringe filter for aqueous solutions

Millex syringe filter for loaded solutions

Millex for gas filtration

Millex filter for HPLC samples

Millex 33 mm sample preparation

Millex Merck Millipore Syringe Filter Unit, PTFE Hydrophilic 13 mm

Air vent filters Midisart 2000

Syringe filters Minisart RC

Syringe filters Minisart® SRP

Syringe filter Minisart High Flow

Syringe filter Minisart

Nalgene™ syringe filters

Specific terms
The sales prices displayed on this page are expressed without tax, those valid at the time of consultation, and take precedence over any price visible in a paper catalogue or in a PDF document.
The indication of the stock is not contractual: this data is in constant evolution and can vary according to the desired quantities.
* Items marked "Consult us for delivery time" are only available on order, and are neither exchangeable nor refundable.
** For products subject to regulation: our customer relations department will contact you after registration in order to obtain the necessary documents to finalise your order.